LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2008 >> Caliber L4-2.4L >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Restraints and Safety Systems >> Air Bag Control Module >> Service and Repair >> Occupant Restraint Controller - Removal

Occupant Restraint Controller - Removal







REMOVAL





1. Open hood.
2. Disconnect and isolate the battery negative cable.

WARNING: Wait two minutes for the airbag system reserve capacitor to discharge before beginning any airbag system or component service. Failure to do so may result in accidental airbag deployment, serious or fatal injury.

3. Remove the floor shifter bezel (1) Center Console - Removal




4. It is necessary to lift up but not remove on the jute covered panel (1) covering the ORC (2).




5. Remove the ORC mounting nuts (2).
6. Disconnect the two ORC connectors (4).
7. Remove ORC (3) from vehicle.