LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2012 >> Ram Cargo Van V6-3.6L >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Body and Frame >> Door Module >> Service and Repair >> Door Module - Removal >> Rear

Rear





REAR





1. Disconnect and isolate the battery negative cable.
2. Remove the trim panel from the inside of the sliding rear door. Door Trim Panel - Removal.
3. Disconnect the electrical connectors (4) from each of the rear door control module (2) connector receptacles.
4. Remove the two screws (1) that secure the module to the rear door hardware module carrier (3).
5. Remove the rear door control module from the carrier.