LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> GTO Standard >> Repair and Diagnosis >> Engine Mechanical >> Engine Mechanical - 5.7L >> Repair Instructions >> On-Vehicle Repair Instructions >> Engine Oil Pressure Sensor and/or Switch Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of J 41712
    GM178483Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. If installing the old sensor, apply thread sealant GM P/N 12346004, (Canadian P/N 1093480), or equivalent.
  2. Use J 41712 to install the oil pressure sensor to the engine block.

    Tighten:  Tighten the engine oil pressure sensor to 20 N.m (15 lb ft).

  3. Fig 2: View Of Oil Pressure Sensor Electrical Connector & Engine Wiring Harness Ground Bolts
    GM379365Courtesy of GENERAL MOTORS CORP.
  4. Connect the oil pressure sensor electrical connector (1).