LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2013 >> Grand Vitara Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Electronic Stability Program >> Diagnostic Information and Procedures >> DTC C1090: ECM Detect Rolling Counter Failure from ESP® Control Module >> DTC Troubleshooting

DTC Troubleshooting

Step Action Yes No
1  Was "Electronic Stability Program Check" performed?  Go to Step 2. Go to ELECTRONIC STABILITY PROGRAM CHECK .
2  DTC check for ESP® 
  1. Connect scan tool to DLC with ignition switch turned OFF.
  2. Turn ignition switch ON and check DTC for ESP®.

Is there any DTC(s) other than C1038 and C1090? 
Go to applicable DTC diag. flow. Go to Step 3.
3  DTC check for ECM 
  1. Check DTC for ECM.

Is DTC U0073 and/or DTC U0121 detected? 
Go to applicable DTC diag. flow. Substitute a known-good ESP® hydraulic unit/control module assembly and recheck.